TOKYO — July 22, 2024 — NTT Corporation and The University of Tokyo announced they have generated and controlled graphene plasmon wave packets with a pulse width of 1.2 picoseconds.
They said this offers a novel approach to terahertz (THz) signal processing by controlling the phase and amplitude of THz signals electrically using graphene plasmon.
“This advancement represents a significant step toward ultra-high-speed signal processing and achieves a 35 percent conversion efficiency from input pulses to graphene plasmon wave packets, surpassing previous light-to-plasmon conversion efficiencies,” NTT said in its announcement. “These findings pave the way for future developments in THz signal processing, including advanced elements like variable frequency filters, amplifiers, and modulators, and potentially integrating photonics with electronic technologies.”
This research was published in the British science journal Nature Electronics on July 17.
- Background
The terahertz region3, located between light and radio waves, has long been considered an unexplored area. However, with the rapid development of generation and detection technologies in recent years, high-speed wireless communication, sensing, and imaging using THz waves propagating in free space are gradually finding their way to social implementation. On the other hand, control technology for THz electrical signals in circuits is still under development, and in general, the signal band that an integrated circuit can handle is limited in the gigahertz (GHz) band. This indicates that there is a limit to the simple extension of existing electronic technology, and it is essential to explore new methodologies to realize faster signal processing.
This research focused on graphene plasmon as a new control technique for THz electric signals. As graphene plasmons confine THz waves in a small region and allow for the electrical control of properties such as wavelength via external voltage, research into THz wave filter and sensor applications is actively being conducted. If these characteristics can be utilized to manage THz electric signals in circuits, it will be possible to develop new ultra-high-speed electronics technologies. Initially, it was unclear whether it was possible to generate and control graphene plasmons electrically in the THz region.
- Research Result
The research group evaluated the propagation characteristics and controllability of graphene plasmon wave packets and the plasmon generation efficiency by injecting ultrashort input pulses in the THz region generated using laser pulses into a graphene device.
Pump/probe spectroscopy combined with a laser pulse and a photoconductive switch enables the generation and detection of THz input pulses on a waveguide. (b): The actual measured THz input pulse. It has a pulse width of 1.2 ps and a frequency component of 0-2 THz.
By inserting a graphene device on the waveguide, the THz input pulse was converted into a graphene plasmon. (b): Cross-sectional diagram of a graphene device. The Au top gate controls the phase and amplitude of graphene plasmon, and the ZnO (zinc oxide) top gate increases the conversion efficiency between electrical pulse and plasmon.
As a result, the following three points became clear for the first time in this experiment.
- We succeeded in generating, controlling, and measuring 1.2 picosecond ultrashort graphene plasmon wave packets on a chip. This pulse width is equivalent to the time width of the input pulse before injection, and it is the shortest electrically excited plasmon wave packet in existence. This indicates that electrical signals in the THz range can be transmitted without distortion.
- We found that the phase and amplitude of the plasmon wave packet can be controlled by electrically modulating the charge density of graphene with a gate. Phase and amplitude control is the basic operation to realize all kinds of signal processing, which means that we have demonstrated a new device operation to handle electrical signals in the THz range.
Real-time waveforms of graphene plasmon wave packets at a metal gate voltage of 1.5 V. The peak exists after 9ps is due to multiple reflections in the circuit. (b): Gate voltage dependence of plasmon wave packet. The amplitude of the plasmon signal varies with the voltage. Further, the propagation time of the signal increases as it approaches the charge neutral point, indicating that the phase changes with the voltage.
- By optimizing the gate electrode material, we reached a maximum conversion efficiency of 35% from input pulses to graphene plasmon wave packets. This value exceeds the conventional light-to-plasmon conversion efficiency4 by several orders of magnitude, making graphene plasmons inherently suitable for handling electrical signals in the THz region. Furthermore, we clarified that not only the conversion efficiency but also the confinement effect, propagation velocity, and pulse width are significantly influenced by the gate electrode. These findings make it possible to optimize the device structure according to the intended purpose.
In this research, we used the highest quality hexagonal boron nitride (hBN) grown by NIMS to fabricate and measure a clean device that protects both sides of graphene at NTT in cooperation with The University of Tokyo.
- Key Research Points
(1) Generation and detection of ultrashort input pulses using THz electronics technology
It is still difficult to generate and detect electrical pulses in the THz region using existing electronics technology. We applied on-chip THz spectroscopy, which combines femtosecond (1/1000 trillion second) optical pulses with a photoconductive switch, to enable the generation and detection of electrical signals in a bandwidth of up to 2 THz.
(2) Graphene device
The use of Au gate enabled the generation of graphene plasmons with a large confinement effect. Furthermore, by adding a zinc oxide (ZnO) gate transparent to the THz signal, high-efficiency plasmon excitation became possible.
In this research, by integrating the technologies (1) and (2) on the same device for the first time, we succeeded in electrical generation, propagation control, and detection of ultrashort graphene plasmon wave packets, and enabled us to understand their characteristics in detail.
- Outlook
These results show that a plasmonic device capable of electrically controlling the phase and amplitude of THz electrical signals in circuits can be implemented. By developing this technology, we aim to realize more advanced signal processing elements such as variable frequency filters, amplifiers, and modulators in the THz region. This research shows that graphene plasmons can be handled with electricity, but considering that plasmons can also be generated by light, it may lead to the development of new photonics-electric convergence technologies.
We expect that further development of signal processing technology in the THz region will contribute to significant improvements in information and communications, as well as computational processing speed in the future.
Research paper information
Journal Name: Nature Electronics
Title: On-chip transfer of ultrashort graphene plasmon wave packets using terahertz electronics
Authors: Katsuasa Yoshioka, Guillaume Bernard, Taro Wakamura, Masayuki Hashisaka, Ken-ichi Sasaki, Satoshi Sasaki, Kenji Watanabe, Takashi Taniguchi, and Norio Kumada
DOI:https: //doi.org/10.1038/s41928-024-01197-x
- Graphene plasmon
Plasmon is an oscillation of the electric charge density. It has the characteristics of a wave-like light, but the electromagnetic field can be confined in an extremely small area compared to light in free space. Graphene plasmons, which are oscillations of free electrons in graphene, are known to have a small loss in the THz region. They are characterized by the ability to control the wavelength, propagation speed, and other properties by changing the electron density. The shortest pulse width of the electrically generated graphene plasmon wave packet was around 25 ps (NTT survey: Phys. Rev. Lett. 110, 016801 (2013)). We reached the THz region for the first time. For further details on graphene plasmons, see Appendix.
- Wave packet
In this study, an ultrashort input pulse with a wide frequency component of 0 to 2 THz is used, so a plasmon wave packet, which is a synthesis of many waves with different wavenumbers, is generated. A wave packet is a wave that exists only in a limited area and behaves like a moving mass of waves. The relation between the pulse width of the wave packet and the frequency component of the wave packet is connected by the Fourier transform. In this study, the propagation measurement of the wave packet which is advantageous for the proof of principle was carried out. The amplitude and phase control of the plasmon signal can be similarly demonstrated using the continuous wave with constant amplitude and frequency.
- Terahertz (THz) range
The THz region is a frequency region located between light waves and radio waves, and generally refers to electromagnetic waves of 0.1 THz to 10 THz. Electronics technology has been developed in the lower frequency region of gigahertz (GHz) (<100 GHz), while photonics technology can be used in the higher frequency range (>10 THz). However, the THz region has not yet been fully applied in industry due to difficulties of handling.
- Conversion efficiency
Graphene plasmons in the THz region have been studied by using electromagnetic fields propagating in free space (or light). In this case, it is known that the momentum mismatch between light and plasmon lowers the conversion efficiency. In particular, the conversion efficiency to a propagating plasmon wave packet is only around 0.005% (NTT survey: Nat. Photonics 12, 22 (2018)).
